Jump to: Page Content, Site Navigation, Site Search,
You are seeing this message because your web browser does not support basic web standards. Find out more about why this message is appearing and what you can do to make your experience on this site better.
BMJ 2006;333:1248 (16 December), doi:10.1136/bmj.38985.564317.7C (published 23 October 2006)
Lisa M Schwartz, associate professor of medicine1, Steven Woloshin, associate professor of medicine1, Evan L Dvorin, instructor of medicine2, H Gilbert Welch, professor of medicine1
1 Veteran Affairs Outcomes Group, White River Junction, VT 05009, USA, 2 Dartmouth Medical School, Hanover, NH
Correspondence to: S Woloshin steven.woloshin{at}dartmouth.edu
Design Structured review of abstracts presenting ratio measures.
Setting Articles published between 1 June 2003 and 1 May 2004 in Annals of Internal Medicine, BMJ, Journal of the American Medical Association, Journal of the National Cancer Institute, Lancet, and New England Journal of Medicine.
Participants 222 articles based on study designs in which absolute risks were directly calculable (61 randomised trials, 161 cohort studies).
Main outcome measure Accessibility of the absolute risks underlying the first ratio measure in the abstract.
Results 68% of articles (150/222) failed to report the underlying absolute risks for the first ratio measure in the abstract (range 5581% across the journals). Among these articles, about half did report the underlying absolute risks elsewhere in the article (text, table, or figure) but half did not report them anywhere. Absolute risks were more likely to be reported in the abstract for randomised trials compared with cohort studies (62% v 21%; relative risk 3.0, 95% confidence interval 2.1 to 4.2) and for studies reporting crude compared with adjusted ratio measures (62% v 21%; relative risk 3.0, 2.1 to 4.3).
Conclusion Absolute risks are often not easily accessible in articles reporting ratio measures and sometimes are missing altogetherthis lack of accessibility can easily exaggerate readers' perceptions of benefit or harm.
Unless ratio measures are reported with the underlying absolute risks, readers cannot judge the clinical significance of the effect. Consider the following example. Readers may be told that the relative risk of death with drug A compared with placebo is 0.5; in other words, people who take drug A are half as likely to die as people who take placebo. But without the underlying absolute risksthe chance of death in each groupthe information is incomplete.1 A relative risk of 0.5, for example, is compatible with a wide range of changes in the risk of death: from 20% to 10%, from 1% to 0.5%, and from 0.0004% to 0.0002%. Effects presented in relative terms alone have been repeatedly shown to seem more impressive than the same effects presented in absolute terms in studies of physicians,2 3 policy makers,4 and patients.5 6 Moreover, providing absolute risks has been shown to improve patients' comprehension of statements of both absolute risk reduction and relative risk reduction.7
The importance of providing absolute risks has been recognised in the requirements of groups trying to improve reporting in the medical literature. The consolidated standards of reporting trials (CONSORT), an international effort initiated in the mid-1990s to improve the reporting of randomised trials, explicitly calls on researchers to state the results using absolute numbers when feasible.8 A more recent initiative organised in 2003, strengthening the reporting of observational studies in epidemiology (STROBE), does as well.9 We systematically determined how frequently the absolute risks comprising ratio measures are reported in the medical literature.
Article review process
We reviewed each article using a standardised data extraction form (see fig A on bmj.com). The coder began by recording the study design, the number of ratio measures reported in the results of the abstract, and the value and name of the first ratio measure in the abstract.
To facilitate understanding of the ratio measure, the coder specified the exposure groups being compared, categorised the exposure groups as discrete (for example, drug versus placebo) or continuous (for example, years of age), and specified the outcome variable (for example, death rate).
The coder then searched for the absolute risks underlying the first ratio measure. Although some of these numbers were true ratesthat is, events per person year of observation in the exposed and unexposedmost were risksthat is, proportion of the exposed and unexposed who had an event in a specified time period, whereas a few others were means (for example, mean time to falling asleep in the exposed and unexposed). For simplicity we use the phrase "absolute risks" to refer to the basic numbers comprising the numerator and denominator of the ratio.
We first determined if the absolute risks were in the abstract. For discrete exposures we simply looked for the two absolute risks underlying the ratio (for example, the absolute risk for those taking drug A and the absolute risk for those taking placebo). For continuous exposures (for example, relative risk of 1.05 for each year of age) we looked for an absolute risk grounding the outcome at any single exposure level (for example, risk of death for patients aged 65 years).
If the absolute risks were in the abstract, no further review was done (n=72). If the absolute risks were not in the abstract, we looked for them in the article, searching the entire text and all tables and figures (n=150). If the absolute risks were not reported anywhere in the article, the coder attempted to calculate them based on the data that were reported. These calculations entailed extracting data from one or more places in the article and ranged from simple division to a series of calculations (see fig B on bmj.com).
Each author coded a subset of articles. Thirty articles were double coded to establish inter-rater reliability. Agreement for all items included in this report was "substantial" or greaterthat is, the kappa statistic ranged from 0.7 to1.0.10 Disagreements were resolved by consensus between the coders.
Analyses
We used the
2 test to compare differences in proportions and t tests to compare means. All analyses were done using Stata version 9.0 and
was set at 0.05.
|
The table
shows the characteristics of articles overall and by journal. On average, article abstracts included 3.3 distinct ratio measures, with a range of 1-14. Most of the articles identified were cohort studies (73% cohort studies v 27% randomised trials), and the abstracts of cohort studies included more ratio measures than the abstracts of randomised trials (mean number of ratio measures 3.6 v 2.5; P=0.002). Overall, 72% (159/222) of the ratio measures were reported as being adjusted (that is, based on a model controlling for a set of covariates) and 28% (63/222) were crude.
|
|
Finally, we compared the accessibility of absolute risks for discrete exposures (for example, taking or not taking a drug) and continuous exposures (for example, years of age). Nine per cent (21/222) of the ratio measures involved continuous exposures; all occurred in the subset of 136 articles that were cohort studies and presented adjusted ratio measures. When the analysis was restricted to this subset, absolute risks were more likely to be reported in the abstract for discrete rather than for continuous exposures (21% v 5%, relative risk 4.1, 0.6 to 28.9).
Some may worry that our suggestionreporting absolute riskssolves one problem by creating its oppositethat is, that absolute risks may lead people to minimise important effects. For example, whereas most doctors would consider the benefit of a drug that reduced all-cause mortality among relatively healthy outpatients over five years from 4% to 3% to be important, many patients might dismiss the 1% point change as trivial. But the challenge here is calibrationto provide the context that this effect is big compared with most drugs in this setting. The solution is not to revert to the language of a "25% reduction," because that fails to distinguish between a change from 4% to 3% and a change from 0.004% to 0.003%, but to calibrate people by exposing them to absolute risks (with and without the intervention) for a variety of medical therapies.
We also found that accessibility of absolute risks is more of a problem for cohort studies than for randomised trials (although it is still substantial in randomised trials, 38% failed to report absolute risks with the first ratio measure in the abstract, and in 12% of cases these numbers were not reported anywhere in the article). The more complete reporting for randomised trials may reflect the widespread acceptance of the CONSORT statement first issued over 10 years ago.8 With the advent of newer organisations such as STROBE,9 focusing on observational studies, the reporting of cohort studies may improve.
Our study has several limitations. Firstly, our analysis was limited to six major medical journals. We deliberately chose this limited sample of journals because of their reputation for quality. Thus we believe our data represent a best case scenario: we think it is unlikely that less prestigious journals with less statistical support and fewer full time editors would be doing a better job. Secondly, our search strategy did not include some study designs (for example, meta-analyses) and some ratio measures (for example, hazard ratios). This was intentional as we wanted to focus on designs where the absolute rates could be directly calculated, and on the most familiar ratio measures. Finally, we evaluated only the first ratio measure in the abstract (rather than all ratios in the abstract or article). This was also intentional to ensure consistency in coding. But there is no reason to believe that subsequent ratio measures are better reported than the first. In fact we argue that because it is first, and may receive extra prominence, the initial ratio measure should be communicated as clearly as possible.
Although authors can do better, ultimately we think it is the responsibility of journal editors to ensure that the absolute risks are easily accessible to readers. In fact journal editors have come to a consensus on this point. More than 190 medical journals in the United States and elsewhere (including our study journals)11 endorse the CONSORT statement for randomised trials, which calls for reporting absolute risks. Many have also endorsed the STROBE statement for cohort studies. Moreover, journal editors are best positioned to make sure that absolute risks are easily accessible. Just as they have (successfully) insisted that authors write a structured abstract, journal editors can insist that authors provide absolute risks adjacent to the corresponding ratio measure. If authors cannot do so, the paper should not be published.
Figure 2
highlights our suggestions for ensuring that absolute risks underlying ratio measures are made easily accessible in journal abstracts. In many instances the process is straightforward. For example, when there are two groups and a crude ratio measure, editors can simply require that the risks in each group be included. Other settings are more challenging, in particular when the ratio measure is adjusted. Two possible methods are considered in figure 2
. Authors could provide the crude absolute risk in each group and the crude and adjusted relative risk to highlight the effect of adjustment. An alternative would be to explicitly provide both the crude and adjusted absolute risks, in addition to the crude and adjusted relative risks. Here editors would have to specify how authors should calculate adjusted absolute risks for each group (and state these rules in the instructions for authors). Three possible standards to use for adjustment are the study population as a whole (which is typically done to provide the risk for the average patient), the unexposed group, or the exposed group (having the advantage of holding one absolute risk constant to facilitate comparison).
|
Figure 2
also provides suggestions for several other issues identified in our review: the reporting of multiple ratio measures in a single abstract (four of the six journals studied had abstracts with over 10 distinct ratio measures); the multiplicity of language used to refer to ratio measures, which frequently does not provide unique information and may simply confuse readers (for example, proportional reduction versus percentage reduction versus risk reduction versus RR); and the confusion about whether a ratio measure without a modifier is crude or adjusted.
To improve the reporting of ratio measures in the medical literature we believe that journal editors need to ensure that absolute risks are routinely included in the abstract adjacent to the corresponding ratio measure. Without the absolute risks, ratio measures alone may leave readers with an exaggerated sense of what studies find. Exaggerated perceptions matter because they may lead to either unwarranted enthusiasm for new medical interventions or unwarranted concern about potentially harmful exposures.
|
Contributors: LMS and SW analysed the data and wrote the first draft. They contributed equally to this project and the order of their names is arbitrary. HGW participated in the design of the analyses and made important contributions to the presentation of the work. ELD participated in design, data collection, and analyses. SW is the guarantor.
Funding: SW and LMS were supported by Veterans Affairs career development awards in health services research and development and Robert Wood Johnson generalist faculty scholar awards. This study was supported by a grant from the National Cancer Institute (R01CA104721) and from a research enhancement award from the Department of Veterans Affairs. The views expressed here do not necessarily represent the views of the Department of Veterans Affairs or the United States government.
Competing interests: None declared.
Ethical approval: Not required.
![]()
CiteULike
Complore
Connotea
Del.icio.us
Digg
Reddit
Technorati What's this?
Read all Rapid Responses